This is normal, since most car? S roof at the front is wider than its rear.
The longer bar is for the front. What if the bar lengths are not correct for my car? There can be more than 1 reasons to this issue.You should insert the bars fully into the mounts. Sometimes it can be hard to insert them fully. You can watch our tips videos to insert them easily. If the bars you receive are of two different lengths, please make sure to insert the longer bar in the front, while the shorter in the rear. There are 4 levels on the mount and you can adjust the length of the bar according to your car?
Sometimes the placement of the bar can impact this length. You will have the freedom to adjust the length from 1 cm to 4 cm. What if there are no protective stickers on my bars, did I get a used product? No, sometimes our quality control team can get the stickers of for random checks. Stickers are used to prevent the bar from getting scratched or damage pre-packing. T get damaged so the sticker is useful. I received a damaged box. Most of the time you do not need to return the product, so please text us before start your return process. It will be much faster and easier than a return process.I want to return the product but I got an unpaid return label. Can I install different brand carriers on Erkul roof racks? Yes you can install all universal carriers on Erkul roof rack crossbars. We have t-track channels on our crossbars so you have the options to install with t-bolts or clamps.
What if there is wind noise? All crossbars can make some noise when they are unloaded and usually at highway speeds.
S very noisy, then you can try to change the placement of the bars back and forth so that it helps reduce the noise. Our bars are designed like wings which helps to reduce the noise. Be sure to install the thicker side facing forward. The bars won't fit because my flush rails are too thick and can?If this is the case then we can offer you some other models. T tighten the mounts because the bolts are short. If you think the bolts are short, please text us.
S possible that the regular screws are giving you hard time installing the mount, please reach us so we can provide longer screws. My bars have bolt holes inner of the rails but Erkul crossbars mount not compatible with this hole. Our mounting design is different. We do not use these holes-on installation. Our mounts are designed to clamp the Roof Rail directly, we believe this is the best way to install a cross bar on your roof rails.
Do not hesitate to reach us if the cross bar isn? T compatible with your rail, we offer different types of cross bars. The claws are too small for the roof rails. If you think the claws of the mounts are too small for your roof rails, please reach us we will be able to provide longer claws for your car roof rails. T have T-track channel on my crossbars, how can I install the ski racks?
If the bracket kit for the clamp-on installation isn? T available inside the box, please reach us so we can provide you the kit for the clamp on installation. I can not slide the ski racks. Please first open the plastic lock to slide the racks. After you slide it back do not forget to lock it again.I cannot tighten the horizontal bolt. If the horizontal bolt is loose and doesn? T have the head nut attached, it?
S possible that it has fallen in the bar, please shake the bar if it? You can watch the installation video to tighten that bolt. T grip the roof rails.If you think the mounts are thick or narrow, please share a photo with us and we can offer you another size of claw that would be compatible with your rails. Why are the bolts so short?
There are extension pieces in the box that must be installed before installing the mount. If you do not have them, please reach us. If you are looking to return your order for whatever reason, we are here to help. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.